WebGate MH1600M Guía de instalación descargar pdf (Pagina 51)

2.3.7 NVS04 connection

2.3.7.1 Connecting with DVR

(1) Connect to DVR as shown in the picture below using Gigabit Ethernet Cable.

(2) Connect DVR Port of NVS04R and Storage Port of DVR directly..

<Note>

1) The network cable connected to DVR should be Gigabit Ethernet Cable (Category-6). If not,

it is not connected to DVR.

2.3.7.2 Set ID Configuration

Set ID using Rotary Switch located on the back. This ID is used as IP Address of NVS04R and

the form of IP address is 10.10.20.XXX. when the user connect more than 2 units of NVS04R,

each ID should be set differently.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 188 189

Sin comentarios

WebGate MH1600M Guía de instalación Pagina 51