WebGate MH1600M Guía de instalación

We sincerely appreciate purchasing Digital Video Recorder. For product connection and initial configuration, please, refer to the installation guide a

Installaction & User Manual 10 7.6.9 Functional function at the bottom of monitor ...

Installaction & User Manual 100 6.4.3 Audio Setup With this menu, user can configure Voice Channel, Audio recording, Volume, Synchronizatio

Voice mixing Select audio in live view. If setting by “Mix On”, all input audio will be out in every channels and if configured certain channel, inpu

Installaction & User Manual 102 Header check It has the various type of data input from the external device (Access Control, POS, ATM etc.)

6.4.5 Serial Setup DVR has 3 serial ports. One is RS-232C(D-Sub) and the other 2 ports are RS-485(Terminal). Serial Port Select Serial port. Device

Installaction & User Manual 104 PTZ Home Shift to preset assigned if it has no movement in certain time while PTZ control. PTZ Idle Time If

6.5 Event Setup There are 5 items such as event, Text, Sync Event, Preset, System event. 6.5.1 Event Check There are 3 items – Always, not apply, C

Installaction & User Manual 106 Not selecting schedule and click delete button, it’ll delete selected schedule first. How to change Select S

System Event source System Event source can configure Bad block, Disk full, Fan error, authorization failure, WRS registration failure,

Installaction & User Manual 108 Sender Address Not mandatory but necessary for receiver to find out which DVR sends event. A

Server URL Enter the FTP server address to send image. User ID Enter the relevant ID when FTP server authentication is set. Password Enter

KEY FEATURES Monitoring Screen Supports real live video with high resolution per each channel and variable display mode.  Real H.264 Video 

Installaction & User Manual 110 Action Duration This is setup for transmission duration of the Twitter Please select Normal Event or System E

6.5.2.4 Relay When event is working, set to relay as a output. To work relay, select event between normal and system event. 6.5.2.5 Buzzer When eve

Installaction & User Manual 112 Channel All or certain channel. Sensitivity Sensitivity can be configured from min.1 to max 10. Are

6.5.4 Sensor This menu is to setup the existing sensor input and type of sensor. 16 inputs Sensor has 2 types, Normal Open(N.O.) and Normal Close(N

Installaction & User Manual 114 6.6 Recording setup There are 3 mode for recording – schedule recording, manual recording, event recording.

Max R/F Max R/F shows the number of frame available according to the selected resolution. For instance, if it is set by 30fps at CIF, it means that

Installaction & User Manual 116 6.6.2 Manual/Schedule recording setup With the change of recording mode, manual recording or schedule r

6.6.2.2 Schedule Setup It records according to the programmed schedule automatically. Make recording mode Schedule & Event and configure day and t

Installaction & User Manual 118 Edition Select Schedule to edit and change weekday, program,time directly. In case that Schedule 50 are all

In “Always”, event works all the time and in “Custom”, works during configured time. Configuration of Custom is similar with schedule configuration an

Installaction & User Manual 12  Supports manual & schedule recording  Video loss detection  Supports archiving event list (Sensor,

Installaction & User Manual 120 6.6.2.4 Continuous Recording Only continuous & event set can record continuously, select Continuous &

7. Web Viewer WebViewer is Web application program loaded to monitor real-time image or to monitor the images recorded through Web brows

Installaction & User Manual 122 7.2 Login After input IP address that set to system, then WebViewer Login page will be connected. Input

7.3 User Setup To access WebViewer, user authority and password can be changed in DVR or Control Center configuration In account menu, user password

Installaction & User Manual 124 Webviewer Installer Login page provides manual installation program to use WebViewer function. PC that ac

Double click on one of the playback screen to convert in 1 channel mode. After conversion to 1channel mode, double click on screen to

Installaction & User Manual 126 7.5.3 Channel On/Off It is On/Off button for the Channel located to left in page. Click the channel wanted

7.5.7 Event Data It shows real time event data occurred at the bottom of monitoring page. Indicated Event data list are as follow.. (Table, Event

Installaction & User Manual 128 7.5.8.2 Saving Video There are 3 types for saving Video - jpg, bmp, eye, saving means the function to record

Reference Supported PTZ camera list can be refereed to ‘4.8 PTZ manipulation. 7.5.10 Using Audio In case of Channel setup sync with Audio, pr

 Supprots 10/100Mbps Ethernet/xDSL  Multiple DVR connection ETC  Supports User friendly GUI and mouse function  Supports User frien

Installaction & User Manual 130 7.6 Playback This page is to playback recorded images, and user who has authority of ‘HDD’ among user ID or

Save Image dialog box appears, then it can input message or select channel name, date, event data. Press ‘OK’ to open dialog box for

Installaction & User Manual 132 7.6.5 Web Monitor Click ‘Go’ button at top of page, and it can move Web monitor page. 7.6.6 Channel On/Of

7.6.9 Functional function at the bottom of monitor ① Indicates playback range of recorded image. ② Press button as the time set at (5) so as

Installaction & User Manual 134 8 JAVA Viewer Java viewer is a web viewer to use in Java. Java should be installed in login screen to use

9 User manual for Mobile Viewer Mobile viewer is viewer service to monitor video via mobile device. To access mobile viewer, user uses mobile device

Installaction & User Manual 136 For functions, please, refer to the below. [0] MENU : Move to Log In page [1] CH- : Move to the previous cha

Trouble shooting 1. DVR booting failure 1. Check the power 2. Check Power cord 2. No video on monitor 3. Check monitor power 4. Check cable betw

Installaction & User Manual 138 9. If network is not working 25. Check if Network cable is connected 26. Check DVR IP 27. Check Computer IP

The way to check the manufacturing date It can be checked with its S/N(Serial Number).. S/N : Serial Number It means composite 12 digit number with

Installaction & User Manual 14 Install Manual 1. Feature 1.1 Supplied Accessories Unpack and check all the items as below AC Cord, Remot

Installaction & User Manual 140 Available HDD Please ask to seller about HDD available with DVR. Compatible CD/DVD list DVD-R manufacturer

Continuous & Event Schedule 24hrs / 7day Playback Instant playback / Search Mode Speed Search Type Time, Calendar, Event, Thumbnail Block Play

Installaction & User Manual 142 User privilege Menu, PTZ, Relay, PB, Power on/off, Backup IP Filtering supported Storage/Backup Storage Dev

Product Dimension MH1600H

Installaction & User Manual 144 MH1600M

MH3200M

Installaction & User Manual 146

Open Source License Report on the Product The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You

Installaction & User Manual 148 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by

1.2 Description & Function 1.2.1 Front Division Description 1 DVD-Multi for Back up Back up use for recorded data by DVD/CD media 2 Jog /

Installaction & User Manual 150 License. (Exception: if the Program itself is interactive but does not normally print such an annou

offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not co

Installaction & User Manual 152 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this Li

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RE

Installaction & User Manual 154 Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for

The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical w

Installaction & User Manual 156 danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL

1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source f

Installaction & User Manual 158 You may make, run and propagate covered works that you do not convey, without conditions so long as your lice

source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that

Installaction & User Manual 16 Relay To run and pause Relay action by manual. Mon Switching monitor PTZ To use Focus / Menu / Preset / Aux

Installaction & User Manual 160 with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designa

service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified o

Installaction & User Manual 162 All other non-permissive additional terms are considered “further restrictions” within the meaning of section

does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions inf

Installaction & User Manual 164 In the following three paragraphs, a “patent license” is any express agreement or commitment, however denomin

consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those t

Installaction & User Manual 166 PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPA

(at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;

Installaction & User Manual 168 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not

ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a

1.2.2 Rear 1.2.2.1 MH1600H No Input/ Output name Description 1 Power connector Socket for AC100V~AC240V power cord. 2 CH1~16 BNC input for ca

Installaction & User Manual 170 Activities other than copying, distribution and modification are not covered by this License; they are outsid

License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do

Installaction & User Manual 172 You must give prominent notice with each copy of the work that the Library is used in it and that the Library

explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Libr

Installaction & User Manual 174 Each version is given a distinguishing version number. If the Library specifies a version number of this Lice

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the F

Installaction & User Manual 176 "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is grant

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-

Installaction & User Manual 178 modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with y

Installaction & User Manual 18 1.1.1.1. MH1600M No Input/ Output name Description 1 Power connector Socket for AC100V~AC240V power co

Installaction & User Manual 180 THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR I

telnet-server license: Copyright (c) 1989 Regents of the University of California. All rights reserved. Redistribution and use in source and binary

Installaction & User Manual 182 following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of

The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS S

Installaction & User Manual 184 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.

Installaction & User Manual 186 This package is an SSL implementation written by Eric Young ([email protected]). The implementation was writt

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply b

Installaction & User Manual 188 PERMISSION & CONDITIONS Permission is hereby granted, free of charge, to any person obtaining a copy of t

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE

1.2.2.3 MH3200M No Input/ Output name Description 1 Power connector Socket for AC100V~AC240V power cord. 2 CH1~32 BNC input for camera conne

Installaction & User Manual 2 Introduction Thank you for purchasing a Webgate digital video recorder. This manual is for MH1600H, MH1600M, M

Installaction & User Manual 20 1.2.3 REMOTE CONTROLLER It is available to use all functions of DVR. If several DVR are set with unique ID nu

10 SEARCH To indicate search menu 11 CHANNEL BUTTON To select channel 12 SELECT Not use 13 +10 In case of selecting over 10 (+10 + 1) 14 MO

Installaction & User Manual 22 2. Installation 2.1 Installation and Connection 2.1.1 Connecting & Running 2.1.1.1 Connecting camera Co

2.1.1.3 Connecting Audio Connect audio signal to DVR with using RCA cable or D-SUB as below. 2.1.1.4 Supplying Power Connect power cable as below.

Installaction & User Manual 24 2.2 Running OSD menu 2.2.1 OSD menu configuration Press [MENU] in keypad of front or Click in [Main Menu]

2.2.1.1 Dialogue box to edit a word Dialogue box to edit a word is image shown as below; It is available to input both word and num

Installaction & User Manual 26 2.2.2.2 Setting ID If several DVRs are with unique ID numbers, they can be controlled with one remote control

2.2.3 Installation examples 2.2.3.1 Basic configuration Connect camera and monitor and Audio. 2.2.3.2 Advanced configuration Connect camera, mo

Installaction & User Manual 28 2.2.3.3 External storage & back up configuration Use USB for back up. 2.2.3.4 Internet / Intranet confi

2.2.4 Basic Setting 2.2.4.1 Viewing Image When power is on, eDVR starts automatically and displayed in basic 16ch-split screen after bo

fire or theft. We take no responsibility for damage from any incident. Caution As this equipment undergone EMC registration and suitable for business

Installaction & User Manual 30 Time Zone Use the left or right arrow key on the front or the mouse wheel to select your time zone. Each pres

DATE FORMAT (1) Select “Date Format” using [◀/▶] or [▲/▼] arrow button and press [Enter] button. Select a value using [◀/▶] arrow button from YYYY

Installaction & User Manual 32 2.2.4.3 Record Setting Select “Record” pressing menu button in front. Manual Setting Manual record can be

Schedule Setting Set the recording schedule by each channel that user want record in “Program” of record menu. Set recording mode as “Schedule & E

Installaction & User Manual 34 2.3 Connecting and configuring DIO ports 2.3.1 Wire Handlin When connecting a wire to a terminal block, f

2.3.3 Connecting and configuring sensor 2.3.3.1 Specification In order to run sensor input DVR normally, the following conditions are required. Sp

Installaction & User Manual 36 Setting Sensor (1) Press [Menu] button and select “Event” when OSD menu is appeared. (2) Move to sub menu pr

2.3.3.2 Connecting relay and setting Specification In order to run relay output of DVR normally, the following conditions are required. SPEC Out

Installaction & User Manual 38 Relay setting It is available to run relay selecting from sensor, motion detection, Text, Video Loss which is

Serial communication port diagram COM1 connection diagram (RS-232 – D-Sub) COM2/COM3 diagram (RS-485)

Installaction & User Manual 4 4. Do not charge the batteries provided with Remote Controller Important Notice 1. Do not place heavy objects

Installaction & User Manual 40 Available PTZ is as below Model Manufacturer Keyboard KBD300A, WGI SPD1800/2600 Webgate WKC-100 keyboa

Hunt Hunt ORX-1000 Sysmenia Fine CRR-1600 LiveEye Tokina Tokina Kodicom KRE Kodicom Nuvico Nuvico Serial Setting You can set up at ‘serial’ menu und

Installaction & User Manual 42 2.3.3.4 Connection to external device via Serial port Text input device connection (ATM / POS / Access Contro

<Reference> Since external device cannot be recognized, before installing, please, ask to the shop. 2.3.3.5 USB Device Connection USB port i

Installaction & User Manual 44 In case of normal connection, if executing Copy menu, disk will be recognized same as below and Set copy range

[AVI Copy] <Reference> A USB Flash memory which should install additional program on Windows OS, cannot be recognized. 2.3.3.6 Video In/Out

Installaction & User Manual 46 2.3.3.7 Audio In/Out connection There are 4 RCA Audio Input and and 12 D-sub Audio input and 1 RCA output.

2.3.4.2 HDD Replacement (1) Turn off the DVR and take off the HDD that has a problem and replace it with new HDD. (2) Turn On the DVR

Installaction & User Manual 48 (1) Cut power (2) Connect Ethernet cable to DVR and Hub. (3) Input Power.. <Reference> To protect D

WRS After changing interval over 1 min, register WRS address and product and input Group ID.

Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified

Installaction & User Manual 50 2.3.6 External device connection DVR has external Storage Device Interface and 1ea of eSATA port. Using eSAT

2.3.7 NVS04 connection 2.3.7.1 Connecting with DVR (1) Connect to DVR as shown in the picture below using Gigabit Ethernet Cable. (2) Connect DVR

Installaction & User Manual 52 Set the ID using driver. The value for the first digit of switch should match with values of 100x on the rare

User Manual 3. Menu Use 3.1 Menu Structure The menu structure will be shown like below image, and each menu setting method descriped from chapter

Installaction & User Manual 54 Function of Playback 3.3 Factory Reset In order to reset value to factory value, go to System Setting->

User Setup Right O Utility DVR Alias DVR0 Language English DVR Keyboard ID 1 Remote Controller ID All Network Network Type Ethernet DH

Installaction & User Manual 56 PTZ PTZ Home Off PTZ Idle Time 5 PTZ Port None PTZ Address 0 Monitor Monitor Minitor1 Alarm Pop-up(Sec)

Sensivity 5 Area Set All Sensor Sensor All, N.O. Preset Channel Number Ch1 Preset Sensor1, Preset1 Record Record Record Mode Manual

Installaction & User Manual 58 List Res Fps Q Res Fps Q Program A D1 15 Q5 D1 15 Q5 B D1 7 Q5 D1 7 Q5 C D1 4 Q5 D1 4

4. Monitoring All analog video image channels connected to DVR is displayed to screen by Power connection. It is to utilize all monitoring mode of D

Installaction & User Manual 6 Contents Introduction ...

Installaction & User Manual 60 4.5 Auto Switch Mode (Sequence) Defined channels or multi screens can be displayed in sequence with configur

4.5.2 User Sequence Mode [Press [AUTO] button or click [Sequence] icon from Function menu with mouse. Auto Switch model can be set from “Monitor” mai

Installaction & User Manual 62 1. If Alarm Pop-up Hold (sec) set to Off, Alarm Pop-up will not operate. 2. If Alarm Pop-up Hold (sec) set t

4.9 PTZ Control Connect PTZ controller to DVR and set relevant protocol from “Serial” menu, then PTZ can operate while monitoring live images.

Installaction & User Manual 64 Below lists are protocols available in DVR Model Manufacturer BOSCH AutoDome, TC8560X-4 Bosch PELCO(P), PELCO

4.9.1 Pan/Tilt/Zoom This menu is used to control Pan / Tilt / Zoom function. Select relevant channel to control PTZ which is connected with PTZ. 4.9

Installaction & User Manual 66 5.Playback 5.1 Playback Mode 5.1.1 Playback on Standard monitor (16 / 9 division) - Please, push play but

5.2 SEARCH MODE This menu is to playback specific time data from the time frame and searching log at Playback mode. There are Time, Calendar, Event,

Installaction & User Manual 68 [MH3200M] Display recording status of channel 1~32 Year : Select Year to search. With mouse wheel, user c

Enter and change the value by Up and Down button. With mouse, click and scroll the wheel. Event Channel : Select the channel for search MH1600H, MH

3. MENU USE ... 53 3.1 Menu Structure ...

Installaction & User Manual 70 using up-down direction key or mouse wheel. Interval : Set Interval value by Up-down button or mouse wheel. V

5.3 Copy This is for copying recorded video. There are CD/DVD and RE4 and AVI type. Copy function is supported to be used by user who has

Installaction & User Manual 72 Please, refer to the recommended media list below. DVD-R manufacturer CD-R Manufacturer Mitsubishi(×16 recom

[MH3200M] Type : Select RE4 using up-down button or mouse wheel. Channel : To pop up the channel selection window, press Enter or use mouse whee

Installaction & User Manual 74 5.3.3 AVI Use USB memory or HDD to copy certain part. Type : Select AVI using up-down key or mouse wheel. C

6. Configuration 6.1 Recording Structure There are 3 modes in DVR recording. Configuration relation structure is like below. Please, refer to the

Installaction & User Manual 76 Time configuration is very important to protect the recording data. Time change on recording is not recommend

Time With left/right direction key, use can move to year, month, day, hour in order and each configuration will be controlled by up/do

Installaction & User Manual 78 6.2.1.2 NTP Setup NTP(Network Time Protocol) make time of connected devices synchronized. There are

6.2.2 Disk It explains how to add or remove or format internal or external HDD. Over Write If there is no space in HDD, old data will be deleted a

Installaction & User Manual 8 5.1.2 Playback function ...

Installaction & User Manual 80 6.2.2.1 Disk Manager This is menu for the management of internal or external HDD. Manage status, bad block, s

- HDD is not used. - If No, keep previous HDD without change. 6.2.2.2 Disk Status Temperature and status of HDD will be shown. 6.2.2.3 Disk Mirror

Installaction & User Manual 82 DVR Mirroring working method MirroringMirroringMirroringMirroring (1) Basically HDDs will be set like the ab

Mirroring configuration - Off : All mounted HDD will be recorded in order without Mirroring. - DVR : Mirroring recording only with internally mounted

Installaction & User Manual 84 <Note> 1. For Mirroring function, HDDs capacity and model for Recording and Mirroring should be s

IEEE1394, USB). 3. For Mirroring configuration in NVS04R or DVR, other HDDs should not be added except its Mirroring configuration. Ex) F

Installaction & User Manual 86 [ MH3200M / MH1600M Model ] DVR/All Mirroring Recording Setting Resolution IPS Quality D1 4 ~ 1 Q5 ~ Q1 Ha

doubled block but it just points out that this Mirroring HDD is not replaced. Actual recording data is not doubled 6.2.3 User Setup There are a

Installaction & User Manual 88 Password change Select user  Input password and press change  Press Yes Password input box is displayed.

6.2.4 Utility Configure the name of DVR, remote controller ID, Language. DVR Alias Set the name of DVR. DVR Keyboard ID This menu is to set t

6.5.4 Sensor ... 113 6.5.5 Preset ...

Installaction & User Manual 90 - System will reboot. - Firmware update is done. System Log System Log shows boot status of system and use

Config Import/Export Export – Save Configuration data in DVR to USB Import – Apply exported Configuration data to relevant DVR or another DVR

Installaction & User Manual 92 6.3 Network This is menu for configuring network. Type Configure type of Network (Ethernet/xDSL). If

DNS Server DNS1 is mandatory item to registry and use WRS and it should be asked to network administrator. UPnP Port Forwarding

Installaction & User Manual 94 6.3.2 WRS If DVR is connected to Cable modem or xDSL modem, IP address is changed at every co

6.3.3 Radius It makes to manage account information from several different DVRs to one account using Radius server. Please ask to Admi

Installaction & User Manual 96 6.3.4 Notifier To use Notifier (Notifier Protocol) function, please, refer to the tech manual or cantact No

6.4 Device Setup This menu is for configuring each camera connected to DVR. There are [name][Status][Color/black or white][Brightness][Contrast][PTZ]

Installaction & User Manual 98 6.4.1.2 Using Channel Configure whether using camera or not. After pressing [Enter], select it using left/r

Covert channel With Covert menu, user can covert the channel in Live/Playback mode In Covert menu, all channel lists will be shown and press [Enter]